Brochure

6
Logic analyzer
Motor drive measurements often require up to four ana-
log measurement channels with no channel free for mon-
itoring digital control interfaces. The digital logic probe
(MSO) of the R&S®Scope Rider features eight additional
digital inputs for analyzing control signals, time-correlated
to the analog channel signals. With 250 MHz bandwidth,
1.25Gsample/s sampling rate and configurable thresholds,
it adapts to almost any digital interface.
Protocol analyzer
Protocols such as I
2
C, SPI or CAN/LIN are frequently used
for transferring control messages between integrated cir-
cuits. The R&S®Scope Rider is the first isolated handheld
digital oscilloscope with trigger and decode capability for
in-depth troubleshooting. Triggering on protocol events or
data enables selective acquisition of relevant events, data
and signals.
Data logger
Sporadic sensor signal faults or rare glitches in a power
supply can cause complex system failures without any
obvious indication of the root cause. The long-term data
logger of the R&S®Scope Rider makes it possible to mon-
itor up to four key measurements at a speed of 1, 2 or 5
measurements per second to uncover such rare failures.
The large memory of 2 Msample per channel allows more
than 23 days of log duration. The statistics display pro-
vides information about minimum and maximum values
with exact time.
Oscilloscope,logicandprotocolanalyzer,data
logger,digitalmultimeter,spectrumanalyzer,
harmonicsanalyzerandfrequencycounter:Withthe
powerofeightinstrumentsanddedicatedoperation
modes for XY operation, roll mode and mask testing,
the R&S®Scope Rider provides the capabilities and
the flexibility needed for debugging all kinds of
electronic systems.
Debuggingpower
inyourhand:
eightinstrumentsin
one portable design
In the lab
In the lab
RTH_Scope_Rider_bro_en_3607-0517-62_v0603.indd 6 16.02.2017 10:58:33