User Manual

Waveform Analysis
R&S
®
Scope Rider RTH
97User Manual 1326.1578.02 ─ 08
To save history data:
1. Set up the history and capture the waveforms.
2. Press the FILE key.
3. Select "Waveforms".
4. Tap "Select Waveform" and select one waveform for export, or select all active
waveforms.
5. Enable "Save History".
If acquisition is running, enabling "Save History" stops the acquisition.
6. Check the "Waveform Directory", the "Filename Base", and the "CSV Column
Delimiter". Adjust if necessary.
7. If you need time information for analysis, enable "Store with Time".
8. Tap "Save Waveform".
All export settings are described in Chapter 11.4.2, "Waveform Export Settings",
on page 225.
History (Option R&S RTH-K15)