User Manual

Spectrum Analysis
R&S
®
Scope Rider RTH
134User Manual 1326.1578.02 ─ 08
To clear the results for previous acquisitions used for averaging, select Clear Results.
Remote command:
HARMonic:AVERage on page 319
5.3.5 Harmonic File Functions
Access: FILE > "Harmonics"
The results of a harmonic measurement can be exported similarly to a waveform (see
also Chapter 11, "Documenting Results", on page 219). The OneTouch functionality is
also available (see Chapter 11.6, "Quick Save with OneTouch", on page 230).
For details on the export file format, see Chapter 5.3.6.2, "Harmonic Results Export
File Format", on page 135.
Save, Save As
Save the harmonic results. The functions are available if the instrument is in "Harmon-
ics" mode.
"Save"
Saves the file in the defined "Harmonic Directory" using the autonam-
ing pattern.
"Save As"
Opens a file explorer where you can select the directory and enter the
filename.
Remote command:
HARMonic:EXPort:SAVE on page 324
Harmonic Directory
Defines the directory where the harmonic results files are stored. If a USB flash drive is
connected, the instrument stores the data to this external device by default.
Remote command:
HARMonic:EXPort:NAME on page 323
Filename Base
Defines the first part of the filename. The complete filename pattern is:
<filename base>_<date>_<time>.csv.
Remote command:
HARMonic:EXPort:NAME on page 323
5.3.6 Reference: Harmonic Results and Limit File Formats
5.3.6.1 Limit File Format
The limit file defines which harmonics are of interest for analysis, and optionally, the
limits against which each harmonic is to be tested. If a user-defined limit file is loaded
for harmonics measurement, only the results for the specified harmonics are calcula-
Harmonics Measurement (Option R&S RTH-K34)