User Manual

Multimeter Measurements
R&S
®
Scope Rider RTH
140User Manual 1326.1578.02 ─ 08
Meter icon "Meter Type" Description
"A AC" AC current measurement
"A DC" DC current measurement
"A AC+DC" AC+DC current (RMS) measurement
"Resistance" Resistance measurement
"Continuity Test" Continuity measurement
"Diode Test" Diode measurement
"Capacitance" Capacity measurement
"Temperature" Temperature measurement (an adapter is required)
"Frequency" Frequency measurement
Remote command:
METer<m>:SENSe:FUNCtion on page 353
Resistance Threshold
This setting is only relevant for continuity measurement. If the measured voltage drops
below the "Resistance Threshold", the instrument beeps.
Probe Setting
Sets the sensitivity factor of the current probe for current measurements.
Sets the adapter type for temperature measurements.
Relative
Activates or deactivates relative measurement. If you activate this function, the cur-
rently measured value is taken as reference value. Instead of the bargraph, the refer-
ence value and the measured value are displayed. You can also set a desired value as
reference value, see "Reference/Reference Manual" on page 141.
You can also activate or deactivate relative measurement by pressing DMM REL.
1
= Reference value
2 = Actual value relative to reference value
Digital Multimeter (R&S RTH1002)