User Manual

Data Logging
R&S
®
Scope Rider RTH
153User Manual 1326.1578.02 ─ 08
Figure 7-4: Logger cursor with summarized data
1 = Maximum value of cursor line 1
2 = Maximum value of cursor line 2
Remote command:
LOGGer:CURSor:TYPE on page 367
Track scaling
If enabled, the position of the cursor lines is adjusted if the scale is changed. The cur-
sor lines keep their relative position to the waveform.
If disabled, the cursor lines remain on their position on the display if the scaling is
changed.
Remote command:
LOGGer:CURSor:SCPLing on page 367
Coupling
Couples the cursor lines so that the distance between the two lines remains the same
if one cursor is moved.
Remote command:
LOGGer:CURSor:COUPling on page 368
Set to screen
Sets the cursors to a default position on the screen. This is helpful if the cursors have
disappeared from the display or need to be moved for a larger distance.
Remote command:
LOGGer:CURSor:SCReen on page 368
7.5.2 Zoom
To analyze logged data, you can use the "Zoom" function, see also Chapter 3.1,
"Zoom", on page 73.
Analyzing Logged Data