User Manual

Data Logging
R&S
®
Scope Rider RTH
156User Manual 1326.1578.02 ─ 08
1. Access the logger mode, see Chapter 7.1, "Accessing the Logger Mode",
on page 147.
2. Select the "Logger" menu.
3. If a data logging is running, press RUN STOP to stop logging.
4. Select the slot with the logs that you want to display.
5. Tap "Load Slot" to display the stored logs.
7.5.5 Deleting Logged Data
Logs stored on the slots can be deleted individually or all together.
To delete logs of a single slot:
1. Select the slot with the logs which you want to delete.
2. Tap "Clear Slot".
To delete logs on all slots:
► Tap "Clear All Slots".
7.6 Logger Records
Export means to save a logger record (slot) to a CSV or MAT file for further analysis.
Export is only possible if the instrument is in "Logger" mode. The instrument always
saves the data of the last saved slot, you cannot select the slot to be stored.
You can also save the data of the measured waveforms when you are in logger mode.
The waveform data has no time correlation to the logger data. For details of waveform
export, see Chapter 11.4, "Waveforms", on page 224.
1. If data logging is running, press RUN/STOP to stop the logging. The logged data is
saved automatically to the slot.
2. Press the FILE key.
3. Tap "Logger Records".
4. Tap "Export As".
5. Select the "File Type", enter the "File Name", and change the folder if necessary.
If a USB flash drive is attached, the file is stored there. Otherwise, the file is stored
in the Export folder on the microSD card.
6. Tap "Save".
The data of the last used slot is saved.
Logger Records