User Manual

Protocol Analysis
R&S
®
Scope Rider RTH
185User Manual 1326.1578.02 ─ 08
Relation
Defines how the defined serial data pattern is compared with the acquired signal. The
instrument triggers if the acquired data word is equal or unequal the defined pattern.
Remote command:
TRIGger:UART:DCONdition on page 397
8.4.4 UART Decode Results
This chapter describes the comb display and the decode results table of decoded
UART buses. Basic information on decoding and display of decode results is given in
Chapter 8.1.2, "Decode Results", on page 163.
Figure 8-14: Comb display of a decoded UART signal, triggered on start bit
UART/RS-232/RS-422/RS-485 (Option R&S RTH-K2)