User Manual

Documenting Results
R&S
®
Scope Rider RTH
222User Manual 1326.1578.02 ─ 08
11.3 Instrument Settings
To repeat measurements or tests at different times or perform similar measurements
with different test data, you can save the used configuration settings for later use. Fur-
thermore, it can be helpful to refer to the configuration settings of a particular measure-
ment when analyzing the results. Therefore, you can easily save the complete mea-
surement configuration including the display settings.
The R&S RTH provides two ways to store the measurement configuration:
●
Save as fast setting
●
Save as saveset
11.3.1 Using Fast Settings
The R&S RTH has 8 slots to save and load often used configuration settings very
quickly.
To save the current setting as fast setting
1. Press the SHIFT key.
2. Tap and hold one of the storage slots F1...F8.
The online keyboard opens.
3. Type the settings name and tap ↵.
The configuration settings are saved to the slot.
To load a fast setting
1. Press the SHIFT key.
2. Tap the storage slot that holds the required configuration.
The settings are loaded.
Alternatively, you can save and load fast settings in the "File" menu: FILE > "Settings"
> "Fast Settings".
Instrument Settings