User Manual

Documenting Results
R&S
®
Scope Rider RTH
225User Manual 1326.1578.02 ─ 08
4. Tap "Select Waveform" and select one waveform for export, or select all active
waveforms.
5. Select the "File Format"
6. Check the "Waveform Directory", the "Filename Base", and the "CSV Column
Delimiter". Adjust if necessary.
7. If you need time information for analysis, enable "Store with Time".
8. If you want to save history data, enable "Save History".
9. Tap "Save Waveform".
All export settings are described in Chapter 11.4.2, "Waveform Export Settings",
on page 225.
11.4.2 Waveform Export Settings
Access: FILE > "Waveforms"
Select Waveform
Select the waveform to be exported. You can export:
●
A single analog channel or math waveform
●
All active digital channels
●
All active waveforms at once
Remote command:
EXPort:WAVeform:SOURce on page 425
EXPort:WAVeform:MULTichannel on page 426
Waveforms