User Manual

ManualsBrandsRohde & Schwarz ManualsOscilloscope Test Probes (Voltage / Frequency)Passive Probe, 100:1, 500MHz, 1kV

301

302

303

304

305

306

307

308

309

310

Remote Control Commands

R&S

Scope Rider RTH

270User Manual 1326.1578.02 ─ 08

Parameters:

<SyncPulseType> BILevel | TRILevel

*RST: BILevel

TRIGger:TV:CUSTom:LDURation <LineDuration>

Sets the duration of a single video line, the time between two successive sync pulses.

Parameters:

<LineDuration> Range: 5E-6 to 200E-6

Increment: 100E-9

*RST: 64E-6

Default unit: s

TRIGger:TV:CUSTom:SDURation

Sets the width of the sync pulse.

Parameters:

<SyncPulseDuration> Range: 100E-9 to 100E-6

Increment: 100E-9

*RST: 4.7E-6

Default unit: s

TRIGger:TV:CUSTom:SCANmode <ScanMode>

Sets the scanning system.

For details, see "Scan" on page 57.

Parameters:

<ScanMode> INTerlaced | PROGressive | SEGMented

*RST: INTerlaced

14.3.5.6 External Trigger (R&S RTH1002)

TRIGger:EXTernal:LEVel................................................................................................270

TRIGger:EXTernal:SLOPe.............................................................................................. 271

TRIGger:EXTernal:LEVel <Level>

Sets the trigger voltage level.

Parameters:

<Level> Range: -10 to 10

Increment: 1E-3

*RST: 0

Default unit: V

Waveform Setup