User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
284User Manual 1326.1578.02 ─ 08
Parameters:
<MinDuration> Range: 800E-12 to 10000
Increment: 100E-9
*RST: 5E-9
Default unit: s
TRIGger:INTerval:MAXWidth <MaxDuration>
Sets the upper time limit of the interval for comparisons WITHin and OUTSide.
Parameters:
<MaxDuration> Range: 800E-12 to 10000
Increment: 100E-9
*RST: 5E-9
Default unit: s
14.3.5.15 Window Trigger (R&S
RTH-K19)
TRIGger:LEVel<m>:WINDow:LOWer...............................................................................284
TRIGger:LEVel<m>:WINDow:UPPer................................................................................284
TRIGger:WINDow:TIME..................................................................................................284
TRIGger:WINDow:RANGe.............................................................................................. 285
TRIGger:WINDow:WIDTh............................................................................................... 285
TRIGger:WINDow:DELTa............................................................................................... 286
TRIGger:WINDow:MINWidth........................................................................................... 286
TRIGger:WINDow:MAXWidth..........................................................................................286
TRIGger:LEVel<m>:WINDow:LOWer <Level>
TRIGger:LEVel<m>:WINDow:UPPer <Level>
Set the upper and lower voltage thresholds for the window trigger, respectively. The
trigger levels are the vertical window limits.
Suffix:
<m>
.
1..4
Indicates the trigger source: analog channel 1 to 4
Parameters:
<Level> Range: -10 to 10
Increment: 1E-3
*RST: 0
Default unit: V
TRIGger:WINDow:TIME <Condition>
Selects how the time limit of the window is defined.
Waveform Setup