User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
286User Manual 1326.1578.02 ─ 08
TRIGger:WINDow:DELTa <Tolerance>
Sets a range Δt to the specified width, which is defined using TRIGger:WINDow:
WIDTh.
Parameters:
<Tolerance> Range: 0 to 5000
Increment: 500E-12
*RST: 0
Default unit: s
TRIGger:WINDow:MINWidth <MinDuration>
Sets the lower time limit of the stay inside or outside the window (comparisons WITHin
and OUTSide).
Parameters:
<MinDuration> Range: 800E-12 to 10000
Increment: 100E-9
*RST: 5E-9
Default unit: s
TRIGger:WINDow:MAXWidth <MaxDuration>
Sets the upper time limit of the stay inside or outside the window (comparisons WITHin
and OUTSide).
Parameters:
<MaxDuration> Range: 800E-12 to 10000
Increment: 100E-9
*RST: 5E-9
Default unit: s
14.4 Waveform Analysis
14.4.1 Zoom
See also Chapter 3.1, "Zoom", on page 73.
ZOOM:ENABle.............................................................................................................. 286
ZOOM:SCALe............................................................................................................... 287
ZOOM:POSition.............................................................................................................287
ZOOM:ENABle <Enabled>
Enables or disables the zoom.
Waveform Analysis