User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
318User Manual 1326.1578.02 ─ 08
SPECtrum:MARKer:RMARker:VALue?
Queries the measured level at the reference marker.
Return values:
<Level> Range: -260 to 260
Increment: 1
*RST: 0
Default unit: dB
Usage: Query only
14.6.2.4 Exporting Spectrum Analysis Results
You can export the spectrum results to a file, similar to waveforms (see Chapter 14.13,
"Documenting Results", on page 424).
SPECtrum:EXPort:NAME................................................................................................318
SPECtrum:EXPort:SAVE................................................................................................ 318
SPECtrum:EXPort:INCXvalues........................................................................................318
SPECtrum:EXPort:NAME <Name>
Defines the file name, file format and path to save the spectrum measurement results.
Parameters:
<Name> String with path and file name with extension .csv.
SPECtrum:EXPort:SAVE
Saves the results of the spectrum measurement to the file specified using SPECtrum:
EXPort:NAME.
For a description of the file format see Chapter 5.2.9, "Spectrum Results Export File
Format", on page 124.
Example:
SPECtrum:EXPort:NAME 'SpectrumResults'
SPECtrum:EXPort:SAVE
SPECtrum:EXPort:NAME?
//Result: /media/SD/Rohde-Schwarz/RTH/Export/SpectrumResults.csv
Usage: Event
SPECtrum:EXPort:INCXvalues <State>
Includes the frequency values in the stored results.
Parameters:
<State> ON | OFF
*RST: ON
Spectrum Analysis