User Manual

ManualsBrandsRohde & Schwarz ManualsOscilloscope Test Probes (Voltage / Frequency)Passive Probe, 100:1, 500MHz, 1kV

381

382

383

384

385

386

387

388

389

390

Remote Control Commands

R&S

Scope Rider RTH

351User Manual 1326.1578.02 ─ 08

Parameters:

<CoupVoltageMeas> DCLimit | ACLimit

DCLimit

Enables AC+DC measurement.

ACLimit

Enables AC measurement.

*RST: DCLimit

Example: Configure and perform AC+DC current measurement with range

100 A:

:METer:CONFigure:CURRent:AC 100

:METer:SENSe:FUNCtion 'CURR:AC'

:METer:CONFigure:VALue?

<-- "CURR:AC 100"

:METer:SENSe:CURRent:AC:COUPling DCL

:METer:READ?

<-- 0.035906488794

Configure and perform AC voltage measurement with range 10

:METer:CONFigure:VAOLTage:AC 10

:METer:SENSe:FUNCtion 'VOLT:AC'

:METer:CONFigure:VALue?

<-- "VOLT:AC 10"

:METer:SENSe:CURRent:AC:COUPling ACL

:METer:READ?

<-- 0.030006488794

14.8.3 Relative Measurements

To perform relative measurements, set the relevant

METer<m>:SENSe:<function>:NULL:STATe command to ON. By default, the refer-

ence value is 0. Alternatively, you can use METer<m>:SENSe:RELative:STATe.

To change the reference value, use the

METer<m>:SENSe:<function>:NULL:VALue command.

METer<m>:SENSe:CURRent:AC:NULL:STATe................................................................ 352

METer<m>:SENSe:CURRent:DC:NULL:STATe................................................................ 352

METer<m>:SENSe:VOLTage:AC:NULL:STATe................................................................ 352

METer<m>:SENSe:VOLTage:DC:NULL:STATe................................................................ 352

METer<m>:SENSe:NULL:STATe.................................................................................... 352

METer<m>:SENSe:RELative:STATe................................................................................352

METer<m>:SENSe:CURRent:AC:NULL:VALue.................................................................352

METer<m>:SENSe:CURRent:DC:NULL:VALue................................................................ 352

METer<m>:SENSe:VOLTage:AC:NULL:VALue.................................................................352

METer<m>:SENSe:VOLTage:DC:NULL:VALue................................................................ 352

METer<m>:SENSe:NULL:VALU......................................................................................353

Voltmeter (R&S RTH1004)