User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
374User Manual 1326.1578.02 ─ 08
Return values:
<LoadedSlot> SLOT1 | SLOT2 | SLOT3 | SLOT4 | SLOT5 | SLOT6 | SLOT7 |
SLOT8 | SLOT9 | SLOT10
*RST: SLOT1
Usage: Query only
LOGGer:SLOT:EXPort:NAME <Name>
Sets the file name, file format and path to save the logger record.
Parameters:
<Name> String with path and file name with extension .csv or .mat.
LOGGer:SLOT:EXPort:SAVE
Saves the logger record of the active slot to the file specified with LOGGer:SLOT:
EXPort:NAME. The active slot is queried with LOGGer:SLOT:ACTive?.
Example:
RUN
LOGGer:SLOT:CURRent SLOT2
STOP
LOGGer:SLOT:ACTive?
<-- SLOT2
LOGGer:SLOT:EXPort:NAME '/media/USB1/SLOT2.MAT"
LOGGer:SLOT:EXPort:SAVE
Usage: Event
14.11 Protocol Analysis
● General Protocol Settings..................................................................................... 374
● I2C (Option R&S RTH-K1).................................................................................... 375
● SPI (Option R&S RTH-K1)....................................................................................385
● UART/RS-232/RS-422/RS-485 (Option R&S RTH-K2)........................................ 393
● CAN (Option R&S RTH-K3).................................................................................. 399
● LIN (Option R&S RTH-K3).................................................................................... 411
14.11.1 General Protocol Settings
BUS:TYPE.................................................................................................................... 374
BUS[:STATe].................................................................................................................375
BUS:FORMat................................................................................................................ 375
BUS:TYPE <Protocol>
Defines protocol type of the bus for configuration and trigger settings.
Protocol Analysis