User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
393User Manual 1326.1578.02 ─ 08
Suffix:
<m>
.
*
Selects the frame.
<n> *
Selects the word number.
Return values:
<StopTime> Range: -100E+24 to 100E+24
Increment: 100E-12
*RST: 0
Default unit: s
Usage: Query only
14.11.4 UART/RS-232/RS-422/RS-485 (Option R&S RTH-K2)
● UART Configuration..............................................................................................393
● UART Trigger........................................................................................................396
● UART Decode Results..........................................................................................397
14.11.4.1 UART Configuration
BUS:UART:SOURce...................................................................................................... 393
BUS:UART:POLarity...................................................................................................... 394
BUS:UART:TECHnology.................................................................................................394
BUS:UART:THReshold...................................................................................................394
BUS:SETReflevels......................................................................................................... 394
BUS:UART:STDBitrate................................................................................................... 394
BUS:UART:BITRate....................................................................................................... 395
BUS:UART:SSIZe..........................................................................................................395
BUS:UART:PARity......................................................................................................... 395
BUS:UART:SBIT............................................................................................................395
BUS:UART:ORDer.........................................................................................................396
BUS:UART:FRAMemode................................................................................................396
BUS:UART:TOUT.......................................................................................................... 396
BUS:UART:SOURce <Channel>
Selects the input channel of the UART line.
Parameters:
<Channel> C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7
C3 and C4: only R&S RTH1004
Digital channels are available if option R&S RTH-B1 is installed.
*RST: C1
Protocol Analysis