User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
400User Manual 1326.1578.02 ─ 08
Parameters:
<Channel> C1 | C2 | C3 | C4 | D0 | D1 | D2 | D3 | D4 | D5 | D6 | D7
C3 and C4: only R&S RTH1004
Digital channels are available if option R&S RTH-B1 is installed.
*RST: C1
Usage: Asynchronous command
BUS:CAN:TYPE <SignalType>
Selects whether the chip select signal is high active (high = 1) or low active (low = 1).
Parameters:
<SignalType> CANH | CANL
CANH
Signal is high active (high = 1)
CANL
Signal is low active (low = 1)
*RST: CANL
BUS:CAN:BITRate <CustomBitrate>
Sets the number of transmitted bits per second.
Parameters:
<CustomBitrate> Range: 10000 to 1000000
Increment: 1
*RST: 50000
Default unit: bps
Protocol Analysis