User Manual

Remote Control Commands

R&S

Scope Rider RTH

403User Manual 1326.1578.02 ─ 08

TRIGger:CAN:DATA <Pattern>

Specifies the data pattern to be found, in binary or hex format. Enter the pattern in

MSB first bit order.

Parameters:

<Pattern> String that contains the pattern in binary format. The parameter

accepts the bit value X (don't care).

TRIGger:CAN:DCONdition <Relation>

Defines how the specified data pattern is compared with the acquired signal. The

instrument triggers if the acquired address is equal or unequal the defined pattern.

Parameters:

<Relation> EQUal | NEQual

*RST: EQUal

TRIGger:CAN:FORMerror

A form error occurs when a fixed-form bit field contains one or more illegal bits.

Parameters:

<FormError> ON | OFF

*RST: ON

TRIGger:CAN:FTYPe <FrameType>

CAN has several frame types which can be used as trigger condition.

For data and remote frames, the identifier format has to be set with TRIGger:CAN:

ITYPe.

Protocol Analysis