User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
420User Manual 1326.1578.02 ─ 08
Example:
BUS:LIN:FRAMe2:SYMBol?
Response: Temperature
Usage: Query only
BUS:LIN:FRAMe<m>:SYSTate?
Returns the synchronization state of the frame.
Suffix:
<m>
.
*
Return values:
<FrameSyncState> OK | STERror | SPERror | PRERror | UVAL | NOEXists |
INSufficient
OK
The frame is valid.
SPERror
Stop error, no stop condition found
STERror
Start error, no start condition found
PRERror
Parity error, which indicates a transmission error
UVAL
Unexpected value
NOEXists
Byte does not exist
INSufficient
The frame is not completely contained in the acquisition. The
acquired part of the frame is valid.
*RST:
OK
Usage: Query only
14.12 Logic Analyzer (R&S RTH-B1 MSO)
LOGic:STATe................................................................................................................ 421
LOGic:THCoupling......................................................................................................... 421
LOGic:GROup<m>:TECHnology..................................................................................... 421
LOGic:GROup<m>:USER...............................................................................................422
LOGic:GROup<m>:THReshold?......................................................................................422
LOGic:GROup<m>:HYSTeresis.......................................................................................423
LOGic:CHANnel<m>:DESKew........................................................................................ 423
POD:STATe?................................................................................................................ 424
Logic Analyzer (R&S RTH-B1 MSO)