User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
421User Manual 1326.1578.02 ─ 08
LOGic:STATe <State>
Enables or disables the logic channels.
Parameters:
<State> ON | OFF
*RST: OFF
LOGic:THCoupling <ThresCoup>
Couples the threshold and hysteresis settings for the logic channels.
If enabled, all logic channels use the same threshold and hysteresis settings.
If disabled, 2 channel groups are available, which can use different threshold and hys-
teresis settings: D0 - D3, and D4 - D7.
Parameters:
<ThresCoup> ON | OFF
*RST: ON
LOGic:GROup<m>:TECHnology <ThresholdType>
Sets the threshold value for the selected channel group, or for all logic channels.
Suffix:
<m>
.
1..3
1 = all logic channels D0 to D7
2 = group D0 to D3
3= group D4 to D7
The suffix only takes effect if LOGic:THCoupling is OFF.
Logic Analyzer (R&S RTH-B1 MSO)