User Manual

Remote Control Commands
R&S
®
Scope Rider RTH
437User Manual 1326.1578.02 ─ 08
<Month> Range: 1 to 12
Increment: 1
*RST: 1
SYSTem:TIME [<Hours>], [<Minutes>], [<Seconds>]
SYSTem:TIME? [<Hours>], [<Minutes>]
Sets the time on the instrument.
Parameters:
<Seconds> Range: 0 to 59
Increment: 1
*RST: 1
Parameters for setting and query:
<Hours> Range: 0 to 24
Increment: 1
*RST: 1
<Minutes> Range: 0 to 59
Increment: 1
*RST: 1
14.14.2 Display Settings
DISPlay:PERSistence[:TYPE]......................................................................................... 437
DISPlay:PERSistence:TIME............................................................................................438
DISPlay:CONTrast......................................................................................................... 438
DISPlay:MOUS..............................................................................................................438
DISPlay:LCD................................................................................................................. 438
DISPlay:PERSistence[:TYPE] <PersistenceType>
Defines how long every new data point remains on the screen.
Parameters:
<PersistenceType> OFF | TIME | INF
OFF
Deactivates persistence.
TIME
Data points remain on the screen for the duration defined with
DISPlay:PERSistence:TIME.
INF
Data points remain on the screen infinitely until persistence is
set to OFF.
*RST: OFF
General Instrument Setup