User Manual

Waveform Setup
R&S
®
Scope Rider RTH
38User Manual 1326.1578.02 ─ 08
2.2 Vertical Setup
The controls and parameters of the vertical system adjust the scale and position of the
waveform vertically.
1. To set vertical scale and position, use the RANGE and POS keys.
2. To adjust other vertical settings, select "Vertical" in the main menu.
Vertical scale and vertical position affect the resolution of the waveform amplitude
directly. To get the full resolution, make sure that the waveforms cover most of the
screen's height.
2.2.1 Vertical Settings
As long as the "Vertical" menu is open, the probe settings of active channels are
shown on top of the display.
Channel Index
Selects the channel to be configured. All settings in the channel menu belong to the
selected channel.
Vertical Setup