User Manual

Connecting the Probe to the DUT
R&S
®
RT-ZS10E/10/20/30
23User Manual 1410.3531.02 ─ 07
Ground adapter, square pin
The ground adapter is used for plugging the
probe onto pin strips with 0.64 mm square pins
(typical pitch 2.54 mm, 100 mil).
The adapter is plugged onto the ground and
signal socket of the probe.
Distance: 2.54 mm (100 mil)
Leads
Short and long lead
The lead provides a flexible connection to the
DUT. It is plugged onto a pin on the DUT and
can be used to connect either the signal
socket or the ground socket. In addition, it
allows micro and mini clips to be connected to
the probe.
Length:
Short lead: 6 mm (236 mil)
Long lead: 15 mm (591 mil)