User Manual

Maintenance and Service
R&S
®
RT-ZS10E/10/20/30
38User Manual 1410.3531.02 ─ 07
5.3 Cleaning
Product damage caused by cleaning agents
Cleaning agents contain substances that can damage the product, for
example, solvent can damage the labeling or plastic parts.
Never use cleaning agents such as solvents (thinners, acetone, etc.), acids,
bases or other substances.
To clean the exterior of the product, use a soft cloth moistened with either distilled
water or isopropyl alcohol. Before using the product again, make sure to dry it
completely.
5.4 Calibration Interval
The recommended calibration interval for R&S RT‑ZS10/20/30 active voltage
probe is two years. For servicing, send the probe to your nearest Rohde &
Schwarz service center (see Chapter 5.2, "Returning for Servicing", on page 37).
5.5 Discarding the Product
Handle and dispose the product in accordance with local regulations.
5.6 Spare Parts
The following accessories can be ordered at the Rohde & Schwarz service cen-
ter. Use the order numbers provided in the following table.
Spare Parts