User Manual

Product Description
R&S
®
RT-ZS10E/10/20/30
5User Manual 1410.3531.02 ─ 07
1 Product Description
1.1 Key Features and Key Characteristics
The R&S RT‑ZS10/20/30 is a single-ended active voltage probe with high input
impedance. It is used for ground-referenced voltage measurements from DC to
1.0 GHz, 1.5 GHz and 3 GHz, respectively.
The comprehensive accessory set allows this probe to be connected to a wide
variety of devices under test (DUT). Provided with special features such as the
R&S ProbeMeter and the micro button, the R&S RT‑ZS10/20/30 is designed to
meet tomorrow's challenges in probing.
Since the probe is equipped with Rohde & Schwarz probe interface, it can be
connected to any Rohde & Schwarz base unit that is compatible with this inter-
face. When connected to the front panel of an R&S oscilloscope, the probe is
controlled via the software menus of the oscilloscope.
Using a specially developed adapter (see Chapter 1.4.2, "Optional Accessories",
on page 12), the probe can be connected to any other base unit.
1.1.1 Key Characteristics
The key characteristics of the probe are the following:
Key Features and Key Characteristics