R&S®RTB2000 Digital Oscilloscope Specifications Data Sheet | Version 03.00 year RTB2000_dat-sw_en_3607-4270-22_v0300_Cover.indd 1 26.01.
Version 03.00, January 2017 CONTENTS Definitions ....................................................................................................................................................................... 3 Base unit .......................................................................................................................................................................... 4 Vertical system .............................................................................................
Version 03.00, January 2017 Definitions General Product data applies under the following conditions: Three hours storage at ambient temperature followed by 20 minutes warm-up operation Specified environmental conditions met Recommended calibration interval adhered to All internal automatic adjustments performed, if applicable Specifications with limits Represent warranted product performance by means of a range of values for the specified parameter.
Version 03.00, January 2017 Base unit Vertical system Input channels Input impedance Analog bandwidth (–3 dB) Lower frequency limit (–3 dB) Analog bandwidth limits (max. –1.8 dB, min. –3.
Version 03.
Version 03.00, January 2017 Video trigger trigger events supported standards sources R&S®RTB2002 R&S®RTB2004 Pattern trigger sync pulse polarity trigger events sources R&S®RTB2002 R&S®RTB2004 state of channels logic between channels condition duration condition Serial bus trigger Trigger sensitivity R&S®RTB2002/R&S®RTB2004 External trigger input Trigger output (AUX OUT connector) min. duration time max.
Version 03.
Version 03.
Version 03.00, January 2017 Display characteristics Diagram types XY mode manually changeable vertical window size Zoom FFT mode Yt, XY, zoom, FFT parallel display of XY diagram and Yt diagrams of input signals for X, Y horizontal zoom with fast navigation, split screen with overview signal and zoomed signal split screen with Yt diagrams and dedicated frequency diagram Interpolation Waveform display Persistence sin(x)/x, linear, sample & hold lines, dots only 50 ms to 12.
Version 03.
Version 03.00, January 2017 General data Display Type Resolution Temperature Temperature loading 10.1" WXGA display with capacitive touch 1280 × 800 pixel (WXGA) operating temperature range storage temperature range Climatic loading Altitude Operating Nonoperating Mechanical resistance Vibration up to 3000 m above sea level up to 4600 m above sea level sinusoidal 5 Hz to 150 Hz, max. 1.8 g at 55 Hz; 0.5 g from 55 Hz to 150 Hz, in line with EN 60068-2-6 MIL-PRF-28800F, 4.5.5.3.
Version 03.
Version 03.
Version 03.
Version 03.00, January 2017 R&S®RTB-K3 CAN triggering and decoding Bus configuration signal type sources bit rate Trigger sampling point label list trigger events identifier setup data setup Decode displayed signals color coding of bus signal displayed format of data frame table Search search events frame event setup error event setup identifier setup data setup event table CAN_H, CAN_L channel 1, channel 2, channel 3, channel 4, logic channels from D0 to D15 10/20/33.3/50/83.
Version 03.00, January 2017 LIN triggering and decoding Bus configuration version bit rate Trigger polarity label list source trigger events identifier setup data setup Decode displayed signals color coding of bus signal displayed format of data frame table Search search events frame event setup error event setup identifier setup data setup event table 16 Rohde & Schwarz R&S®RTB Digital Oscilloscope 1.3, 2.x or SAE J602; mixed traffic is supported 1.2/2.4/4.8/9.6/10.417/19.
Version 03.
Version 03.00, January 2017 Ordering information Designation Type Order No. Choose your R&S®RTB2000 base model Digital Oscilloscope, 70 MHz, 2 channels R&S®RTB2002 1333.1005K02 Digital Oscilloscope, 70 MHz, 4 channels R&S®RTB2004 1333.1005K04 Base unit (including standard accessories: R&S®RT-ZP03 passive probe per channel, power cord, getting started manual and safety instructions) Choose your bandwidth upgrade 4 Upgrade of R&S®RTB2002 oscilloscopes to 100 MHz bandwidth R&S®RTB-B221 1333.1163.
Version 03.00, January 2017 Warranty Base unit All other items Options Extended Warranty, one year Extended Warranty, two years Extended Warranty with Calibration Coverage, one year Extended Warranty with Calibration Coverage, two years 3 years 1 year R&S®WE1 R&S®WE2 R&S®CW1 R&S®CW2 Please contact your local Rohde & Schwarz sales office. Extended warranty with a term of one and two years (WE1 and WE2) Repairs carried out during the contract term are free of charge 5.
Service that adds value Worldwide Local and personalized ❙ Customized and flexible ❙ Uncompromising quality ❙ Long-term dependability ❙ ❙ Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, monitoring and network testing.