Scope of the art R&S®Scope Rider Handheld digital oscilloscope ❙ 60 MHz to 500 MHz ❙ Isolated, CAT IV Invest 2 minutes and you‘ll never look back. RTH_Scope_Rider_bro_en_3607-0517-62_v0603.indd 1 Brochure | Version 06.03 Lab performance in a rugged and portable design 16.02.
R&S®Scope Rider Experience our handheld scope for 2 minutes and you‘ll never look back In the lab Lab performance in a rugged and portable design – the perfect multipurpose tool for the lab or in the field.
Wireless remote control In the field CAT IV 600 V/CAT III 1000 V: galvanic-insulated floating channels Rugged, dust and water resistant housing Capacitive touch and keypad operation ❙ Full operation via touch panel or keypad ❙ See more with a 7" color display ❙ Easy parameter adjustment with multifunction wheel ❙ Large buttons for use with gloves Multifunction wheel Unmatched connectivity: USB, Ethernet and wireless LAN Large buttons, can be used with gloves RTH_Scope_Rider_bro_en_3607-0517-6
Superior performance: a lab oscilloscope in a handheld package In the lab ❙❙60 MHz to 500 MHz at up to 5 Gsample/s ❙❙High-speed acquisition system with history mode ❙❙10 bit A/D converter ❙❙Excellent sensitivity: 2 mV/div to 100 V/div ❙❙Up to 200 V offset compensation range ❙❙33 automatic measurement functions ❙❙Deep zoom with 500 ksample acquisition memory 4 RTH_Scope_Rider_bro_en_3607-0517-62_v0603.indd 4 16.02.
e lab In the lab Lab oscilloscope performance Safe measurements on power electronics When debugging embedded devices in the lab or analyzing complex problems in the field, the R&S®Scope Rider offers the performance and capabilities of a lab oscilloscope as well as the form factor and ruggedness of a battery- operated handheld device. Analyzing modern electric drive systems requires measuring motor voltages and currents while analyzing digital control signals.
Debugging power in your hand: eight instruments in one portable design In the lab Oscilloscope, logic and protocol analyzer, data logger, digital multimeter, spectrum analyzer, harmonics analyzer and frequency counter: With the power of eight instruments and dedicated operation modes for XY operation, roll mode and mask testing, the R&S®Scope Rider provides the capabilities and the flexibility needed for debugging all kinds of electronic systems.
e lab In the lab XY operation mode Mask test mode Relative phases between two signals can be easily measured with the dedicated XY mode that also shows the individual time signals. The mask test mode shows pass and fail statistics and makes it easy to set up masks based on test signals. Digital multimeter The two-channel variant R&S®RTH1002 features a dedicated, isolated digital multimeter with 10 000 count resolution.
Capacitive touch and keypad operation: intuitive to use ❙❙Full instrument control via touch panel or keypad ❙❙Excellent readability and crystal clear signals: 7", 800 × 480 pixel capacitive touch display ❙❙Multifunction wheel for easy parameter adjustment ❙❙Large keys for use with safety gloves In the field Wireless LAN or Ethernet: easy remote control within a web browser An integrated wireless LAN module or the Ethernet port allow the R&S®Scope Rider to be remotely controlled directly from the web brows
e field In the field Wireless LAN or Ethernet: easy remote control for safety critical measurements An integrated wireless LAN module and web server allows easy remote control of the R&S®Scope Rider. The waveform display and user interface of the R&S®Scope Rider are directly available in the web browser; all settings can be changed on the screen.
Built for your work environment: outstanding protection and ruggedness ❙ Isolation of all analog input channels ❙ Rated for measurements in CAT III 1000 V/ CAT IV 600 V environments ❙ IP51 housing for harsh environments ❙ Nonslip and impact resistant rubberized surface Double insulation for maximum safety CH 4 CH 1 CH 2 CH 3 DC and/or AC voltage Channel reference In the field Maximum safety in all environments Troubleshooting in industrial environments presents many challenges.
e field Wide range of probes and accessories The R&S®Scope Rider comes with all essential accessories as standard: ❙❙ 500 MHz, 10:1, 600 V CAT IV voltage probe for each input channel ❙❙ Power supply with plugs for EU, GB and US ❙❙ Battery pack ❙❙ Soft handle In addition, a wide range of accessories is available: ❙❙ 500 MHz, 100:1, voltage probes ❙❙ Replacement accessory set for voltage probes ❙❙ Extended accessory set for voltage probes ❙❙ Current probes ❙❙ 12 V/24 V car adapter ❙❙ Soft carrying bag ❙❙ Ha
Specifications in brief Specifications in brief Vertical system Input channels Maximum input voltage 2-channel models 2 oscilloscope channels, 1 digital multimeter 4-channel models 4 oscilloscope channels BNC inputs CAT IV 300 V (RMS), 424 V (Vp) with probe R&S®RT-ZI10 or R&S®RT-ZI11 CAT IV 600 V, CAT III 1000 V Input sensitivity 2 mV/div to 100 V/div Vertical resolution of overall system 9 bit Acquisition and horizontal system Maximum realtime sampling rate 1/2/4 channels active 5/2.5/1.
Ordering information Designation Type Order No. Handheld Oscilloscope, 60 MHz, 2 channels, CAT IV, DMM R&S®RTH1002 1317.5000k02 Handheld Oscilloscope, 60 MHz, 4 channels, CAT IV R&S®RTH1004 1317.5000k04 Upgrade of R&S®RTH1002 oscilloscopes to 100 MHz bandwidth R&S®RTH-B221 1325.9717.02 Upgrade of R&S®RTH1002 oscilloscopes to 200 MHz bandwidth R&S®RTH-B222 1325.9723.02 Upgrade of R&S®RTH1002 oscilloscopes to 350 MHz bandwidth R&S®RTH-B223 1325.9730.
Preconfigered Two-Channel R&S®Scope Rider Packages Package Name Preconfigured 2-channel R&S®Scope Rider Package Order No. Package consists of Type Order No. 2-Channel R&S®Scope Rider Base Models RTH1002 60 MHz, 2 channels, CAT IV, DMM 1317.5000P02 RTH1002 60 MHz, 2 channels base model 1317.5000k02 RTH1012 100 MHz, 2 channels, CAT IV, DMM 1317.5000P12 RTH1002 60 MHz, 2 channels base model 1317.5000k02 RTH-B221 100 MHz bandwidth upgrade for RTH1002 1325.9717.
Oscilloscope portfolio R&S® family RTH1000 HMO1002 HMO1202 HMO Compact Number of channels 60/100/200/350/500 MHz (upgradeable) 2 plus DMM/4 50/70/100 MHz (upgradeable) 2 100/200/300 MHz 70/100/150/200 MHz (upgradeable) 4 V/div 1 MΩ 2 mV to 100 V 1 mV to 10 V V/div 50 Ω – – Max. memory (per channel/1 channel active) Segmented memory 1.25 Gsample/s pro channel (4-channel model); 2.
e) aded) RTM2000 RTE1000 RTO2000 200/350/500 MHz/1GHz (upgradeable) 600 MHz/1/2/3/4 GHz (upgradeable) 2/4 200/350/500 MHz/1/1.5/2 GHz (upgradeable) 2/4 1 mV to 10 V 500 µV to 10 V 1 mV to 10 V (500 µV to 10 V in HD mode1)) 1 mV to 2 V 500 µV to 5 V 1 mV to 5 V (500 µV to 5 V in HD mode1)) 2.
Preconfigered Four-Channel R&S®Scope Rider Packages Package Name Preconfigured 4-channel R&S®Scope Rider Package Order No. Package consists of Type Order No. 4-Channel R&S®Scope Rider Base Models RTH1004 60 MHz, 4 channels, CAT IV 1317.5000P04 RTH1004 60 MHz, 4 channels base model 1317.5000k04 RTH1014 100 MHz, 4 channels, CAT IV 1317.5000P14 RTH1004 60 MHz, 4 channels base model 1317.5000k04 RTH-B241 100 MHz bandwidth upgrade for RTH1004 1326.0588.
Service that adds value ❙ ❙ ❙ ❙ ❙ Worldwide Local and personalized Customized and flexible Uncompromising quality Long-term dependability About Rohde & Schwarz The Rohde & Schwarz electronics group offers innovative solutions in the following business fields: test and measurement, broadcast and media, secure communications, cybersecurity, radiomonitoring and radiolocation.