Brochure

ManualsBrandsRohde & Schwarz ManualsHandheld OscilloscopesHandheld Oscilloscope 2x 200MHz 5GSPS

Active single-ended probe

Upgrade to an active single-ended

probe for more accurate higher

frequency measurements.

An amplifier built into the probe

near the tip ensures low capacitive

Benefits

► Low capacitive loading minimizes

loading influence at higher

frequencies

► Integrated R&S®ProbeMeter

provides DC level with very high

accuracy

► Built-in offset compensation

enables higher vertical sensitivity

Power rail

Active single-ended

Active differential

Current

High voltage

Probe type

Active differential probe

Use differential probes

to measure single-ended

signals (signal to ground)

and differential signals (plus

versus minus).

Benefits

► Confidently capture differential

signals

► High common mode rejection

ratio ensures accuracy with large

common mode changes

► Signals under test retains high

fidelity with thanks to capacitive

probe loading

Current probe

Choose a clamp-on current probe

for non-intrusive current measure-

ments. These probes have a neg-

ligible effect on the device under

test and come in models with vary-

ing current and bandwidth ratings.

Benefits

► Quickly measure small to large

currents without disturbing your

device

► Measure low to high frequency

(>100MHz) current bandwidth

► Easily connect and power the

probe with the Rohde & Schwarz

probe interface on the

oscilloscope

Power rail probe

Use a power rail probe to

measure small AC charac-

teristics of DC signals. These

probes have a large built-in

offset, 1:1 low-noise attenua-

tion and excellent DC loading.

Benefits

► Accurately measure your power

rail with a low-noise 1:1 probe

attenuation factor

► High offset enables use of small

vertical settings

► Integrated R&S®ProbeMeter

accurately measures the

DCvoltage

High voltage probe

Safety is a key consideration

when measuring high

voltages. High voltage

differential probes with the

appropriate CAT rating make

sure that large voltage spikes

cannot harm the operator.

Benefits

► Measure fast-switching

semiconductors up to 200 MHz

► Large offset compensation

range up to 2000 V enables

higher resolution

► High common mode rejection

ratio enables accurate gate-

source voltage measurements

CHOOSE THE RIGHT PROBE

FOR YOUR APPLICATION