Setup Manual
Table Of Contents
- R&S®Tx9 Transmitter System
- Contents
- 1 Information about this Manual
- 3 Introduction to Operation
- 4 Device View Description
- 4.1 System Overview
- 4.2 Transmitter
- 4.3 Exciter DVB-T2
- 4.6 Exciter ATSC
- 4.7 Exciter DTMB
- 4.11 Switchless Combiner
- 4.12 Cooling System
- 5 Task View Description
- 6 Operating the Device Manager
- 7 User Administration
Task View Description
R&S
®
Tx9
232Operating Manual 2109.9110.02 ─ 07
Examples of MIBs and contents
MIB Description
RS-COMMON-MIB Contains general Rohde & Schwarz definitions
RS-XX9-SMI-MIB Contains top-level definitions of other XX9 MIBs
RS-XX9-TC-MIB Contains definitions for textual conventions used in other MIBs
RS-XX9-COMMON-MIB Contains definitions that comply with all of the transmitters from the XX9 family
(e.g. configuration)
RF-XX9-TX-MIB Contains definitions for single transmitters not dependent on the TV standard
RF-XX9-MTX-MIB Contains definitions for MultiTx and N+1 systems
5.3.1.4 Which MIBs Must Be Used?
The device can be queried by SNMP in order to find out which MIBs have been imple-
mented. This information is contained in the table "sysORTable"
(OID .iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).system(1).sysORTable(9) of
the SNMPv2 MIB). There is a corresponding MIB for each type of modulation.
Fig. 5-3: sysORTable display
System Control