Setup Manual
Table Of Contents
- R&S®Tx9 Transmitter System
- Contents
- 1 Information about this Manual
- 3 Introduction to Operation
- 4 Device View Description
- 4.1 System Overview
- 4.2 Transmitter
- 4.3 Exciter DVB-T2
- 4.6 Exciter ATSC
- 4.7 Exciter DTMB
- 4.11 Switchless Combiner
- 4.12 Cooling System
- 5 Task View Description
- 6 Operating the Device Manager
- 7 User Administration
Task View Description
R&S
®
Tx9
244Operating Manual 2109.9110.02 ─ 07
Name Description Value range Access right
File State (File
Info)
Indicates the status of the backup stored on the R&S®TCE900.
●
Available Backup OK
The backup is OK.
●
No Backup Available
No backup has yet been made on or uploaded to the
R&S®TCE900.
●
Invalid Backup
The backup is faulty. The backup cannot be used.
●
Invalid Device
The backup was not made on a R&S®TCE900. It is not compati-
ble with this device. None of the files from this backup can be
restored on this R&S®TCE900.
●
Invalid Checksum
The check routine performed on the backup returned a checksum
error. The backup cannot be used in this case.
●
Not Compatible
The backup loaded from an external storage medium is not com-
patible with the R&S®TCE900. The backup cannot be used in
this case.
●
Invalid Software Version
To be able to operate, the R&S®TCE900 requires a more recent
software version than that contained in the backup.
- Read only
Tx Name (File
Info)
Shows the name of the transmitter from which the backup originates. - Read only
Name (File Info) Shows the name of the device from which the backup originates. If the
device name is not TCE900, the backup cannot be restored. The Inva-
lid Device fault is displayed in this case.
- Read only
Part Number (File
Info)
Shows the part number of the R&S®TCE900 from which the backup
originates. The backup can only be restored if the displayed part num-
ber is identical to the part number of the R&S®TCE900. The Not
Compatible fault will otherwise be displayed.
- Read only
Date Time (File
Info)
Indicates when the backup was made. - Read only
Serial Number
(File Info)
Shows the serial number of the instrument from which the backup was
made.
- Read only
SW Version (File
Info)
Shows the software version which the backup contains. - Read only
5.5 Options
Under "Options" it is possible to activate additional features on a transmitter. The fea-
tures requested when a transmitter was ordered are activated at the factory before the
transmitter is delivered. Additional features can be purchased at any time from your
local Rohde & Schwarz sales partner.
Options are stored on a SIM card inside the R&S®TCE900 and are always valid for the
R&S®TCE900 in which the SIM card is installed. Options can be transferred to another
R&S®TCE900 by swapping the SIM card.
The Task View (Home) > Options > Status menu provides an overview of the available
or installed options.
Options