Setup Manual

User Administration
R&S
®
Tx9
257Operating Manual 2109.9110.02 ─ 07
7 User Administration
The user administration facility is available in conjunction with browser-based opera-
tion. The settings that you enter in user administration are also valid for opening menus
in local operation. You can use the user administration facility to perform the following
tasks.
●
Create new user profiles
●
Change user profiles (users and access rights)
●
Delete user profiles
●
Close active sessions
The "Superuser" ID with the factory‑set password 1234 gives you extensive user
administration rights.
7.1 Creating New User Profiles
Proceed as follows to create a new user profile:
1.
Log on as Superuser via the web interface.
User name: Superuser
Password: 1234
The processing options and a list of existing users are displayed.
2. Select the Add new user option.
3. Enter a user name and password and the desired permissions for this user.
The password must be at least 6 characters long.
4. Click "Add user" if the settings are correct.
Click "Reset" if the settings are not correct, and enter the settings again.
7.2 Changing User Profiles (Users and Access Rights)
Proceed as follows to modify an existing user profile:
1. Log on as Superuser via the web interface.
User name: Superuser
Password: 1234
The processing options and a list of existing users are displayed.
2. From the list of existing users, select the user to be modified from the Select col-
umn.
3. Select the Change selected user option.
4. Change the user's profile according to your requirements.
Creating New User Profiles