Setup Manual

Introduction to Operation
R&S
®
Tx9
26Operating Manual 2109.9110.02 ─ 07
3.2.1 Connection Setup and Login
1. Create a physical network connection to the transmitter. The following options are
available:
a) Remote access via WAN (Wide Area Network)
b) Local access directly to a transmitter using a LAN cable
2. Start the browser and enter the following information in the address bar:
a) IP address of the transmitter
The website for operating the transmitter is called (login page).
3. Enter your user name and password.
Note: The following login information is preconfigured at the factory
● User name: Query
Password: 1234
● User name: Operation
Password: 1234
● User name: Maintenance
Password: 1234
● User name: Configuration
Password: 1234
Change the user names and passwords after logging in for the first time chap-
ter 3.3.7.2, "Managing Users", on page 32.
After successfully logging in, the actual user interface is displayed.
3.3 Structure of User Interface
3.3.1 Elements of User Interface
The user interface is composed of the following elements:
●
Menu bar:
The menu bar provides access to the most important functions.
●
System status:
This display provides a constantly visible, general overview of the entire system
status.
●
Path bar:
The path bar shows the current position within the menu structure and provides the
ability to quickly return to higher menu levels.
●
Working area:
The various tasks and configuration steps are carried out in the working area.
Structure of User Interface