Setup Manual
Table Of Contents
- R&S®Tx9 Transmitter System
- Contents
- 1 Information about this Manual
- 3 Introduction to Operation
- 4 Device View Description
- 4.1 System Overview
- 4.2 Transmitter
- 4.3 Exciter DVB-T2
- 4.6 Exciter ATSC
- 4.7 Exciter DTMB
- 4.11 Switchless Combiner
- 4.12 Cooling System
- 5 Task View Description
- 6 Operating the Device Manager
- 7 User Administration
Introduction to Operation
R&S
®
Tx9
29Operating Manual 2109.9110.02 ─ 07
●
Device View
●
Task View.
3.3.3.1 Logbook
The logbook is used for logging all system events and for troubleshooting and error
analysis.
3.3.3.2 Help
This button is used to activate the help function. The following steps must be per-
formed:
1.
Press the Help button.
All of the elements for which help information is available are identified by a blue
frame.
2. Select the desired element.
The corresponding help information is shown in a separate window.
3.3.3.3 Local/Remote
The transmitter can be operated via both local access and via remote access.
The Local/Remote button allows you to toggle between the two types of access.
The transmitter can be switched from remote operation to local operation from at any
time.
For safety reasons, remote operation is not possible if the system is currently being
operated locally.
The current status (L = Local, R = Remote) is shown directly on the Local/Remote but-
ton. The corresponding status of each transmitter is shown individually for multi‑trans-
mitter systems.
3.3.3.4 Login/Logout
The login dialog allows a user to log in or log out of the system.
3.3.3.5 Device View
This button is used to switch to the Device View.
Structure of User Interface