Setup Manual

Table Of Contents
Introduction to Operation
R&S
®
Tx9
36Operating Manual 2109.9110.02 ─ 07
The messages can be filtered selectively according to individual or multiple levels
(Info | Warning | Fault) at the same time by selecting/deselecting the checkboxes
"Show Infos"
, "Show Warnings" and "Show Faults".
Selecting the "Show open issues only" checkbox will cause only messages that are
still active to be displayed, in other words, messages that still have not been rem-
edied,
Component filter:
The messages can be filtered selectively according to individual or multiple system
components (System | Exciter A/B | Output Stage) at the same time by selecting/
deselecting the checkboxes.
Options:
The following options are available:
Clear logbook
"Clear Logbook" is used to completely delete the contents of the logbook.
Restore logbook
"Restore Logbook" is used to restore the logbook after it has been inadvertently
deleted.
Messages
The "Messages" display shows the number of entries in the logbook.
Close
"Close" is used to close the entire filter function.
3.3.8.4 Scroll Function
The scroll function enables navigation within a long event list and the selection and
detailed view of specific events.
Structure of User Interface