Setup Manual

Device View Description
R&S
®
Tx9
64Operating Manual 2109.9110.02 ─ 07
"Type Plate" parameters
●
Path: "Device View (Home)" > "Tx <n>" > "Output Stage" > "Amplifiers" > "Ampli-
fier <n>" > Tab "Type Plate"
Information about the amplifier is set at the factory.
Name Description Value range Access right
Name Instrument designation Read only
Part Number R&S material number and order number of the instrument. Specify this
number when reporting faults.
Read only
Variant Instrument variant Read only
Product Index Production index (parts change index) Read only
Serial Number Serial number Read only
Production Date Production date Read only
SW/FW/Bios
Number
Software, firmware or BIOS number Read only
4.2.4 Rack
"Status Rack" parameters
Name Description Value range Access right
Absorber With multi‑rack transmitters, this indicates whether one
of the rack absorbers is overheating. This fault can
occur if several amplifiers of a rack fail and additionally
there is a fault in the cooling system.
Green: OK
Red: too hot
Read Only
Cabinet Door Indicates whether the rear rack door is open or closed
(does not apply to TMU9).
Green:
Closed
Yellow: Open
Read Only
Overvoltage Protectors Indicates whether the overvoltage protection for the
respective component is still functioning.
Green: OK
Red: Fault
Read Only
Transmitter