Setup Manual
Table Of Contents
- R&S®Tx9 Transmitter System
- Contents
- 1 Information about this Manual
- 3 Introduction to Operation
- 4 Device View Description
- 4.1 System Overview
- 4.2 Transmitter
- 4.3 Exciter DVB-T2
- 4.6 Exciter ATSC
- 4.7 Exciter DTMB
- 4.11 Switchless Combiner
- 4.12 Cooling System
- 5 Task View Description
- 6 Operating the Device Manager
- 7 User Administration
Device View Description
R&S
®
Tx9
218Operating Manual 2109.9110.02 ─ 07
Name Description Value range Access right
Sensor 1 (Pres-
sure 1)
Indicates the status of pressure sensor 1. If a fault is indicated, first
check the connecting cable between the sensor and the air cooling
interface card in the R&S TCE900 system control unit.
Off, Sensor Fault,
OK
Read only
Sensor 2 (Pres-
sure 2)
Indicates the status of pressure sensor 2. If a fault is indicated, first
check the connecting cable between the sensor and the air cooling
interface card in the R&S TCE900 system control unit.
Off, Sensor Fault,
OK
Read only
"Status Fan 1/2" parameters
Name Description Value range Access right
Communication Indicates whether the data transfer from fans 1/2 to the air cooling
interface (ACIF) is OK.
OK, Fault Read only
Speed Indicates the speed of fans 1/2 read out from the air cooling interface
(ACIF).
0 % to 100 % Read only
Cooling System