Setup Manual

Task View Description
R&S
®
Tx9
225Operating Manual 2109.9110.02 ─ 07
Name Description Value range Access right
Transmitters Indicates how many transmitters the system contains.
The B transmitter of an N+1 system is not included here.
The setting can be changed here if the "System Control"
function is active.
1 to 8 Configuration
Modulation Indicates the modulation mode of the exciter. An appro-
priate software option must additionally be installed for
the displayed modulation mode.
Either the modulation modes for TV/DAB or those for FM/
FMHD are available.
The setting can be changed here if the "TX Control" or
"Exciter" function is active.
DVB‑T2,
DVB‑T,
ISDB‑T,
ATSC, ATV,
DAB, FM,
FMHD
Configuration
Rack Number Indicates the rack in which the R&S TCE900 module is
installed. The left-hand rack is assigned the number 1.
The setting can be changed here if the "System Control",
"TX Control" or "Exciter" function is active.
1 to 18 Configuration
Amplifier
Mode
Indicates whether the amplifiers are to be operated in
broadband or Doherty mode. To operate the amplifiers in
Doherty mode, the frequency ranges of the amplifiers
must be set to the transmit frequency. This display only
applies to amplifier types which support Doherty mode.
The setting can be changed here if the "TX Control" or
"Exciter" function is active.
Broadband,
Doherty
Configuration
Amplifiers Indicates the total number of amplifiers per output stage
of this transmitter. Whether the amplifiers are housed in
one or more racks is irrelevant. Up to 24 amplifiers per
output stage are supported (FM: up to 8 amplifiers).
The setting can be changed here if the "TX Control" func-
tion is active.
1 to 24 Configuration
Amplifier
Type
Indicates the amplifier type used in the transmitter.
●
PHU901:
High‑power amplifier, UHF, liquid‑cooled.
●
PMU901:
Medium‑power amplifier, UHF, air‑cooled with Doh-
erty mode.
●
PHU902:
High‑power amplifier, UHF, liquid‑cooled with Doh-
erty mode.
●
PHV902:
High‑power amplifier, VHF, liquid‑cooled with Doh-
erty mode.
●
PMV901:
Medium‑power amplifier, VHF, air‑cooled with Doh-
erty mode.
The setting can be changed here if the "TX Control" or
"Exciter" function is active.
PHU901,
PMU901,
PHU902,
PHV902,
PMV901,
PHR901,
PMR901
Configuration
Slot Number Indicates the position at which the R&S TCE900 is instal-
led in the respective rack. In the THU9, position 1 is the
left-hand slot; in the TMU9, position 1 is the top slot.
The setting can be changed here if the "System Control",
"TX Control" or "Exciter" function is active.
1 to 12 Configuration
Basic Settings