www.rohlhome.
www.rohlhome.com A1467 Spare Parts __SPOUT RING SET C7593SET C7232-2 C7075-2 counterclockwise A5556CR A5556CR Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION FOR SINGLE HOLE/TWO LEVER FAUCETS with two lever or cross handle design (MODELS INCLUDE: A1467, A1466, A1470, A1469 or A1680,A1679, A1667, A1676) Model A1676 shown 1. Install the supply hoses into the body. ° Note: hand tighten only, do not over tighten. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION 2. Install mounting stud securely or verify it is installed 3. Insert faucet into mounting hole Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions INSTALLATION 4. Under the sink, stack the half ring rubber gasket - 6, the half ring mounting plate - 7, then the mounting nut - 8 onto the stud. 8 5. Check the position on the sink of the faucet, then tighten the nut with a 13mm wrench. ° Note: the under deck mounting surface must be flat. If irregular, the nut may not be secured, and the faucet will be loose on the sink. 6. Connect the supply lines to the hot and cold supplies. 7.
www.rohlhome.com Installation Instructions MAINTENANCE FOR SINGLE HOLE/TWO LEVER FAUCETS with two lever or cross handle design HOW TO CHANGE THE HOT OR COLD CARTRIDGE (MODELS INCLUDE: A1467, A1466, A1470, A1469 or A1680,A1679, A1667, A1676) (model A1469 and A1676 shown) 1.Turn off the hot and cold supply lines to the faucet. (Not shown) 2. Remove the handle and dome. 3.
www.rohlhome.com Installation Instructions MAINTENANCE 4. 4. Install new cartridge 5. Turn on supply lines and test for leaks. Not shown. 6. Install lever and dome 5.-6. Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.
www.rohlhome.com Installation Instructions Consult your local ROHL showroom for additional information and specifications. For complete warranty details and a list of showrooms, go to www.rohlhome.com.