Datasheet

Technical Note
BA10358F/FV, BA10324AF/FV, BA2904SF/FV/FVM, BA2904F/FV/FVM
BA2902SF/FV/KN, BA2902F/FV/KN, BA3404F/FVM
6/25
www.rohm.com
2010.11 - Rev.
A
© 2010 ROHM Co., Ltd. All rights reserved.
Absolute Maximum Ratings (Ta=25[])
BA3404 family
Parameter Symbol Ratings Unit
Supply Voltage VCC-VEE +36 V
Differential Input Voltage
(*13)
Vid 36 V
Input Common-mode Voltage Range Vicm (VEE-0.3)(VEE+36) V
Operating Temperature Range Topr -40+85
Storage Temperature Range Tstg -55+150
Maximum Junction Temperature Tjmax +150
Note:Absolute maximum rating item indicates the condition which must not be exceeded.
Application if voltage in excess of absolute maximum rating or use out of absolute maximum rated temperature environment may cause
deterioration of characteristics.
(*13) The voltage difference between inverting input and non-inverting input is the differential input voltage.
Then input terminal voltage is set to more than VEE.
Electric Characteristics
BA3404 family (Unless otherwise specified VCC=+15[V], VEE=-15[V], Ta=25[])
Parameter Symbol
Temperature
Range
Limits
Unit Condition
BA3404 family
Min. Typ. Max.
Input Offset Voltage
(*14)
Vio 25 - 2 5 mV VOUT=0[V], Vicm=0[V]
Input Offset Current
(*14)
Iio 25 - 5 50 nA VOUT=0[V], Vicm=0[V]
Input Bias Current
(*14)
Ib 25 - 70 200 nA VOUT=0[V], Vicm=0[V]
Large Signal Voltage Gain AV 25 88 100 - dB
RL2[k],
VOUT=±10[V],Vicm=0[V]
Maximum Output Voltage VOM 25 ±13 ±14 - V RL2[k]
Input Common-mode Voltage Range Vicm 25 -15 - 13 V VOUT=0[V]
Common-mode Rejection Ratio CMRR 25 70 90 - dB
VOUT=0[V],
Vicm=-15[V]+13[V]
Power Supply Rejection Ratio PSRR 25 80 94 - dB
Ri10[k],
VCC=+4[V]+30[V]
Supply Current ICC 25 - 2.0 3.5 mA
RL= All Op-Amps,
VIN+=0[V]
Output Source Current Isource 25 20 30 - mA
VIN+=1[V],VIN-=0[V],
VOUT=+12[V],
Output of one channel only
Output Sink Current Isink 25 10 20 - mA
VIN+=0[V], VIN-=1[V],
VOUT= -12[V],
Output of one channel only
Slew rate SR 25 - 1.2 - V/μs
AV=0[dB],
RL=2[k],CL=100[pF]
Unity Gain Frequency ft 25 - 1.2 - MHz RL=2[k]
Total Harmonic Distortion THD 25 - 0.1 - %
VOUT=10[Vp-p],f=20[kHz],
AV=0[dB],RL=2[k]
(*14) Absolute value