JetStream Pro ® Back with CF Technology Operations Manual SUPPLIER: THIS MANUAL MUST BE GIVEN TO THE USER OF THIS WHEELCHAIR BACK. USER: BEFORE USING THIS WHEELCHAIR BACK, READ THESE INSTRUCTIONS AND SAVE FOR FUTURE REFERENCE.
Language Page Index English Spanish French German Italian Dutch Danish Swedish Norwegian Finnish Portuguese 2 Respaldo JetStream Pro™, con tecnología CF Manual de utilización Dossier JetStream Pro™ fabriqué à partir de la technologie de la fibre de carbone (FC) Manuel d’utilisation JetStream Pro‘ Rückenteil mit CF (Kohlenstoff-Faser) Technologie Betriebsanweisung Poggiaschiena JetStream Pro™ con tecnologia CF Manuale di istruzioni JetStream Pro™ rugsteun met CF technologie Gebruiksaanwijzing JetStream Pro
WARNING • DO NOT operate the JetStream Pro without first reading and understanding this manual. If you need assistance contact your clinician, ROHO provider or ROHO, Inc. • The JetStream Pro has not been tested for use in a motor vehicle. The risk of an accidental disconnect that could result in a fall and potential serious injury has not been assessed. Always have the user transfer to an approved vehicle seat. CAUTION • Before using the JetStream Pro, ROHO, Inc.
JetStream Pro with CF (carbon fiber) Technology INTENDED USE The JetStream Pro is an ergonomically designed wheelchair back replacement support system that promotes an upright posture, by providing support at the posterior pelvis and trunk. This support system eases the strain on the lower back. The light weight JetStream Pro is easy to attach to the back posts and set to the necessary height on the wheelchair. ROHO, Inc.
JetStream Pro Fixed Back Standard and Low Height Parts Detail A F B G H C I D J E K L Product Registration Card A. Operations Manual - instructions on JetStream Pro use and installation. B. Privacy Flap - polyester material bridges gap between JetStream Pro Back and wheelchair seat. C. Lumbar Support Pad -foam pad provides added support to lumbar region. D. Reducer - for more secure fit with Standard JetStream Pro Backs on 3/4" (1.9 cm) back posts (Qty. 2). 7/8" (2.2 cm) available upon request. E.
Attaching & Removing the JetStream Pro Fixed Back Standard & Low Height To Your Wheelchair Mount Hardware Cap Piece Cap Piece Screw CAUTION: DO NOT attach or adjust the JetStream Pro while the wheelchair is occupied. Step 1: Remove existing wheelchair backrest/upholstery. Step 2: Place the JetStream Pro onto wheelchair back posts. Attach cap pieces by inserting the cap piece screw(s). Do not fully tighten. (4 screws to each Standard Back, 1 per Cap Piece) (4 screws to each Low Back, 2 per Cap Piece ).
JetStream Pro Adjustable Back Standard and Low Height Parts Detail B A F& G' H( I) C J* K+ D L, E MN. O Product Registration Card A. Operations Manual - instructions on JetStream Pro use and installation. B. Privacy Flap - polyester material bridges gap between JetStream Pro Back and wheelchair seat C. Lumbar Support Pad - foam pad provides added support to lumbar region. D. Reducer - for more secure fit with Standard JetStream Pro Backs on 3/4" (1.9 cm) back posts. (Qty. 2) 7/8" (2.
Attaching & Removing the JetStream Pro Adjustable Back Standard and Low Height To Your Wheelchair Bracket Clamp Cap Piece Cap Piece Screw Hex Head Bolt Nut Figure 1 Figure 2 Figure 3 CAUTION: DO NOT attach the JetStream Pro while the wheelchair is occupied. Step 1: Remove existing wheelchair backrest/upholstery. Step 2: Hold the adjustable bracket clamps and cap pieces in place around the chair back posts and secure by tightening cap piece screw, as shown in Figure 1.
Attaching Accessories to the Fixed or Adjustable JetStream Pro Back Attaching The JetStream Pro Privacy Flap 1. Remove existing contoured foam pad from the JetStream Pro Back. 2. Attach the loop side of the double sided Velcro® portion of the Privacy Flap to the hook side Velcro strips on the JetStream Pro Back. 3. Remove the cushion from the wheelchair and attach the opposite end of the Privacy Flap to the Velcro on the base of the wheelchair seat. 4.
Cleaning and Disinfecting the JetStream Pro Back Cleaning and Disinfecting are two separate processes. To be effective, cleaning must precede disinfecting. NOTE: Institutions MUST clean, disinfect, and check product for proper functioning between multiple patient use. Cleaning the JetStream Pro Carbon Fiber Shell & Hardware Using a soft cloth, hand wash the carbon fiber shell & hardware with mild soap and warm water. Towel Dry with a soft cloth. Cleaning the JetStream Pro Breathable Cover Remove foam.
Limited Warranty What is covered? ROHO, Inc. covers any defects in materials or workmanship of the product. Any substitutions of supplied components will void the warranty. For how long? 24 months from the date the product was originally purchased, with the exception of fabric components, which have a 6 Month Limited Warranty. What we will do.
A L L I A N C E ROHO, Inc. 100 N. Florida Avenue • Belleville, IL 62221 U.S.A. U.S.A.: Toll Free 800-851-3449 • Fax: 618-277-9561 Outside the U.S.A.: 618-277-9150 • Fax 618-277-6518 www.therohogroup.com • E-mail: cs@therohogroup.
