User Manual

RFID Manual_v1.0 ROKIT Healthcare, INC. Page. 3 / 9
- Do not use if the cable is damaged, and do not disconnect the power while using the product.
- This can result in electric shock, fire, failure, and injury.
- Be sure to keep conductive foreign substances, such as liquid, dust, or metal debris, away
from the power supply or from collecting on the cable. Do not use excessive force or anything
sharp on the power connector. The connection terminal may be corroded, or short-circuited
temporarily and result in an explosion or fire.
- Be sure to check the right battery type and replace a run-down battery with a new battery.
Wrong handling may damage the product or cause explosion. Dispose of the wron-out
battery properly in an appropriate way.
- If there are any problems with the product, stop using immediately and contact the customer
service center.
Caution
- Unauthorized installation, remodeling, repair, and disassembling are not recommended.
This may result in damage to the product, and malfunctions due to unauthorized actions
will void your warranty.
- If installation assistance or repair are required, contact the customer service center.
- Do not install or use the product in a dusty or dirty area. This may result in damage to
the product or deteriorate performance.
- Do not install or use the product in a place with magnetic strips or electromagnetic
interference. This may result in damage to the product or deteriorate performance.
- Check the wiring information and use appropriate cables. Do not attempt to connect a
cable by force. This may result in damage to the product, cable, and the connector.
- Do not install or use the product in a place with strong light exposure or direct sunlight.
- The product’s quality might be reduced due to sunlight, halogen, or strong light exposure.
- This product is not waterproof. Take precautions to avoid exposure to moisture.
- Do not put things on top of the product or connect any unnecessary devices. Do not
paint or place any stickers on this product. This may deteriorate performance or result in
the product not functioning properly.
- Do not scratch the surface, and keep it clean at all times.