SDS

Product name: ROKREZ METALLIC BASE Issue Date: 08/16/2019
Page 9 of 11
Biodegradation: 12 %
Exposure time: 28 d
Method: OECD Test Guideline 302B or Equivalent
Theoretical Oxygen Demand: 2.35 mg/mg Estimated.
Photodegradation
Test Type: Half-life (indirect photolysis)
Sensitizer: OH radicals
Atmospheric half-life: 1.92 Hour
Method: Estimated.
Bioaccumulative potential
Bioaccumulation: Bioconcentration potential is moderate (BCF between 100 and 3000 or
Log Pow between 3 and 5).
Partition coefficient: n-octanol/water(log Pow): 3.242 at 25 °C Estimated.
Mobility in soil
Potential for mobility in soil is low (Koc between 500 and 2000).
Given its very low Henry's constant, volatilization from natural bodies of water or moist soil is
not expected to be an important fate process.
Partition coefficient(Koc): 1800 - 4400 Estimated.
13. DISPOSAL CONSIDERATIONS
Disposal methods: DO NOT DUMP INTO ANY SEWERS, ON THE GROUND, OR INTO ANY BODY
OF WATER. All disposal practices must be in compliance with all Federal, State/Provincial and local
laws and regulations. Regulations may vary in different locations. Waste characterizations and
compliance with applicable laws are the responsibility solely of the waste generator. AS YOUR
SUPPLIER, WE HAVE NO CONTROL OVER THE MANAGEMENT PRACTICES OR PARTIES
HANDLING OR USING THIS MATERIAL. THE INFORMATION PRESENTED HERE PERTAINS
ONLY TO THE PRODUCT AS SHIPPED IN ITS INTENDED CONDITION AS DESCRIBED IN SDS
SECTION: Composition Information. FOR UNUSED & UNCONTAMINATED PRODUCT, the
preferred options include sending to a licensed, permitted: Incinerator or other thermal destruction
device.
14. TRANSPORT INFORMATION
DOT
Not regulated for transport
Classification for SEA transport (IMO-IMDG):
Proper shipping name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S.(Epoxy resin)
UN number
UN 3082
Class
9
Packing group
III
Marine pollutant
Epoxy resin
Transport in bulk
Consult IMO regulations before transporting ocean bulk