Owner's Manual
Table Of Contents
- Owners Manual
- Introduction
- Unpacking
- Directives
- AC Mains Supply
- Maintenance
- Location
- Streaming Amplifier Front Controls
- Streaming Amplifier Rear Connections
- Integrated Amplifier Front Controls
- Integrated Amplifier Rear Connections
- Remote Control
- USB Wi-Fi Dongle
- Connecting to the Wi-Fi
- Connections
- BluOS Playback
- MaestroUnite App
- Operation
- MQA
- Updates
- Warranty
- Troubleshooting
- Specifications
- Quick Start Guide
- Important Safety Instructions
MM Gain
The phono stage’s Moving Magnet (MM) Gain adjustment is to allow for the varying output voltages of
phono cartridges. It will be set to Mid by default which is for cartridges with an output of around 6 mV max
which will be the setting needed for any Roksan Cartridge for example, Corus 2 or Dana.
The “Low Gain” setting should be used with cartridges that have a high output level of around 12 mV.
The “High Gain” setting to be used with 3 mV cartridges.
The levels are changed by pressing the Play/ Pause button on the remote or via MaestroUnite.
Balance
Here the balance of the Streaming/ Integrated Amplier can be tailored to suite the room/ set up by
adjusting it to sound central from your listening position. From the central position it can be adjusted 3dB to
either the left or the right channels.
The levels are changed by pressing the Play/ Pause button on the remote or via MaestroUnite.
roksan.com12