PORTABLE AIR COMPRESSOR OWNER’S MANUAL WARNING COMPRESSOR DISCHARGE AIR MAY CONTAIN HYDROCARBONS AND OTHER CONTAMINANTS! DO NOT USE DISCHARGE AIR FOR BREATHING! PARTS Genuine ROLAIR replacement parts are sold nationwide through a network of authorized dealers and service centers. Please contact the dealership where your air compressor was purchased or our factory Customer Service Department if you need help troubleshooting, obtaining parts, or locating an authorized ROLAIR service representative.
TABLE OF CONTENTS Introduction and Definitions of Safety Warnings--------------------------------------------------------- 1 Safety Warnings – Risk of Asphyxiation & Bursting---------------------------------------------------- 2 Safety Warnings – Risk of Electrocution, Shock, Explosion, & Fire-------------------------------- 3 Safety Warnings – Risk of Moving Parts, Burns, & Lifting--------------------------------------------- 4 Safety Warnings – Risk of Propelled Objects, Unsafe Operation, and Dama
INTRODUCTION Congratulations on the purchase of your new ROLAIR air compressor! With over 45 years experience building ROLAIR air compressors specifically designed for the professional, Associate Engineering Corporation has earned a reputation for providing a product unsurpassed in quality and reliability. We are committed to continuing this tradition by analyzing and adapting to the changing needs and rigorous demands of your industry. You can depend on ROLAIR because they are built to last.
SAFETY WARNINGS Read and Understand all Safety Warnings before using Air Compressor Hazard Level Risk of Asphyxiation Risk of Bursting Potential of Hazard How to Avoid Hazard Serious injury or death may occur from inhaling compressed air. The air stream may contain carbon monoxide, toxic vapors, or solid particles. Never inhale compressed air directly from the pump, receiver, or from a breathing device connected to the air compressor.
SAFETY WARNINGS Read and Understand all Safety Warnings before using Air Compressor Hazard Level Risk of Electrocution or Electrical Shock Potential of Hazard How to Avoid Hazard Serious injury or death could occur if the air compressor is not properly grounded. Always plug compressor into a properly grounded outlet which provides correct voltage, proper grounding, and adequate fuse protection. Electrical shock may occur if compressor is not properly operated.
SAFETY WARNINGS Read and Understand all Safety Warnings before using Air Compressor Hazard Level Risk From Moving Parts Risk of Burn Risk of Injury from Lifting Potential of Hazard How to Avoid Hazard Serious injury may occur from moving parts such as belts, pulleys, flywheels, or fans if they came in contact with you or your clothing. Never operate the air compressor without protective belt guards installed. Replace damaged protective covers or guards immediately.
SAFETY WARNINGS Read and Understand all Safety Warnings before using Air Compressor Hazard Level Potential of Hazard How to Avoid Hazard Serious injury may occur from loose debris being propelled at high speeds from the compressed air stream. Always wear OSHA required “287” safety glasses to protect the eyes during operation of the air compressor. Never point the air stream or tools at any point of your body, other people, or animals.
SYSTEM CONTROLS (1) SAFETY RELIEF VALVE Every ROLAIR air compressor is equipped with a safety relief valve which is designed to discharge tank pressure at a predetermined setting when a systems failure occurs. Check the safety valve periodically by pulling on the ring only when the tank pressure is completely drained. The spring loaded valve should move freely within the safety valve body.
(8) PILOT UNLOADER VALVE A pilot unloader valve is used on all gas-powered units and can be used on electric air compressors to operate in a continuous manner. When the storage tank reaches the top pressure setting of the pilot valve, the air being compressed is discharged to atmosphere instead of into the storage tank. When the tank pressure drops to the low pressure setting of the pilot valve, the compressed air will be redirected to the air tank.
PRE-START CHECKLIST Read the owner’s manual thoroughly. Make sure that you completely understand all of the safety warnings, system controls, and instructions provided before attempting to operate this air compressor. Every effort has been made to provide you with the information needed to obtain many years of reliable and trouble-free service out of your new air compressor. It is your responsibility to operate the air compressor properly.
OPERATION WARNING – Your safety and the wellbeing of others during the operation of every ROLAIR compressor is our main concern. Do not operate or permit anyone else to operate your air compressor until the information contained in this manual is read and completely understood. Please contact your distributor or our customer service department if you have any questions on the proper use of your air compressor.
MAINTENANCE Your new air compressor represents the finest engineering and construction available. Even the best machinery requires periodic maintenance. Please stick to the maintenance schedule and consider the suggestions that follow to keep your compressor in peak condition. NOTE: Always unplug or shut down your compressor and drain the air tanks completely before attempting any type of maintenance. Wait for compressor to cool before servicing.
TORQUE CHART (INCH/LBS) Pump Type Direct Drive K12 K17 K18 K24 K28 K30 96 120 N/A N/A N/A 243 182 130 121.5 243 243 182 130 121.5 382 243 182 130 121.5 382 243 182 130 121.5 382 391 330 130 121.5 477 391 330 130 121.5 477 Head Bolts Cylinder Bolts Bearing Carrier Bolts Connecting Rod Bolts Flywheel Determine pump type using suffix of Model number (Example: 4090HK17 uses K17 pump) PILOT VALVE ADJUSTMENT RESETTING DIFFERENTIAL (2) Make sure the top toggle lever is positioned as shown.
TROUBLESHOOTING WARNING - Make sure you completely understand all of the safety warnings and operation of each system control component before attempting any maintenance or repair. Always drain the tank pressure completely, make sure the power cord is unplugged, and unit has time to cool before performing any maintenance or service operations.
Guarantee Associate Engineering Corporation warrants that all ROLAIR compressors will be free of defects in material and workmanship for a period of twelve months from the date of initial retail purchase, or eighteen months from the date of manufacture, whichever may occur first.