User Manual

10
PROGRAM CHANGE NUMBERS
A Program Change number is selected using the “Bank” button and “Number” pedals.
The Program Change message is transmitted the moment the Bank Shift button or
Number pedal is pressed.
Changing Banks
Pressing a Bank Shift button (UP or DOWN) changes Bank numbers in sequence (0 to
12). The Bank Display shows the Bank Number currently selected.
fig.06
* When Bank 10, 11 or 12 is selected, the Dot in the upper left hand corner of the display will light.
Bank numbers 0 to 12 correspond to Program Change numbers as indicated in the following:
fig.07
You can change Bank numbers using a pedal by connecting a foot switch (BOSS
FS-5U: optional) to the BANK SHIFT Jacks (UP/DOWN) on the rear of the GFC-50.
* When using the FS-5U, set the polarity switch as shown below.
fig.07a
Changing Numbers
Using the Number Shift (A/B) Pedal and the Number Pedals, you can select numbers 1 to 10.
Numbers 1 to 10 correspond to Program Change numbers 1 to 10 respectively. By selecting A
or B with the Number Shift Pedal, you can select numbers 1 to 5 or 6 to 10 as shown below.
fig.08
With the Number Indicators and Number Shift Indicators, you can determine what
number is currently set.
Display
Banks 0 1 2
10 11 12
Banks
Program
Change Number
0
0 1 2 10 11 12
10 20 100 110 120
Polarity switch
A
B678910
12345
1/6 2/7 3/8 4/9 5/10
GFC-50(T)_05347_Manual.e 10 ページ ２００７年６月７日 木曜日 午後６時８分