User Manual

13
CHANGING MIDI CHANNEL
The GFC-50’s default MIDI channel is channel 1. If you wish to change the default
channel, follow this procedure:
* The MIDI channel you set will not be stored in memory. It will be necessary to set the MIDI
channel each time the unit is turned on.
1. Switch on the unit while holding the Number Shift Pedal (A/B) down.
2. Select the desired MIDI channel using the Bank Shift Buttons (UP/DOWN).
(The Bank Display shows the MIDI channel currently selected.)
fig.13
* When any of MIDI channels 10 to 16 is selected, the Dot in the upper left hand corner of the
display will light.
3. Press the Number Shift Pedal (A/B). (The MIDI channel has now been set.)
Display
MIDI CHANNEL 123 10 11 12 16
GFC-50(T)_05347_Manual.e 13 ページ ２００７年６月７日 木曜日 午後６時８分