User Manual

Features
6
r
FR-1 V-Accordion
• At regular intervals, you should unplug the AC adaptor and clean
it by using a dry cloth to wipe all dust and other accumulations
away from its prongs. Also, disconnect the power plug from the
power outlet whenever the FR-1 is to remain unused for an extended
period of time. Any accumulation of dust between the power plug and
the power outlet can result in poor insulation and lead to fire.
• Try to prevent cords and cables from becoming entangled. Also,
all cords and cables should be placed so they are out of the reach
of children.
• Never climb on top of, nor place heavy objects on the FR-1.
• Never handle the AC adaptor or its plugs with wet hands when
plugging into or unplugging from, an outlet or this unit.
• Before moving the FR-1, disconnect the AC adaptor and all cords
coming from external devices.
• Before cleaning the FR-1, turn off the power and unplug the
adaptor from the outlet.
•Whenever you suspect the possibility of lightning in your area,
disconnect the adaptor from the outlet.
• If used improperly, batteries may explode or leak and cause dam-
age or injury. In the interest of safety, please read and observe
the following precautions.
• Carefully follow the installation instructions for batteries, and
make sure you observe the correct polarity.
• Avoid using new batteries together with used ones. In addi-
tion, avoid mixing different types of batteries.
• Remove the batteries whenever the unit is to remain unused for an
extended period of time.
•If a battery has leaked, use a soft piece of cloth or paper towel to wipe
all remnants of the discharge from the battery compartment. Then
install new batteries. To avoid inflammation of the skin, make sure that
none of the battery discharge gets onto your hands or skin. Exercise
the utmost caution so that none of the discharge gets near your eyes.
Immediately rinse the affected area with running water if any of the
discharge has entered the eyes.
• Never keep batteries together with metallic objects such as ballpoint
pens, necklaces, hairpins, etc.
• Used batteries must be disposed of in compliance with whatever
regulations for their safe disposal that may be observed in the
region in which you live.
• Keep any screws, reference caps, the hexagonal wrench and
other small parts you may remove in a safe place out of chil-
dren’s reach, so there is no chance of them being swallowed
accidentally.
2. Important notes
Power supply
• Do not connect the FR-1 to same electrical outlet that is being used by an
electrical appliance that is controlled by an inverter (such as a refrigera-
tor, washing machine, microwave oven, or air conditioner), or that con-
tains a motor. Depending on the way in which the electrical appliance is
used, power supply noise may cause this unit to malfunction or may pro-
duce audible noise. If it is not practical to use a separate electrical outlet,
connect a power supply noise filter between this unit and the electrical
outlet.
• The AC adaptor will begin to generate heat after long hours of consecu-
tive use. This is normal, and is not a cause for concern.
• The use of an AC adaptor is recommended as the unit’s power consump-
tion is relatively high. Should you prefer to use batteries, please use the
rechargeable Ni-MH type.
•When installing or replacing batteries, always turn off the power on this
unit and disconnect any other devices you may have connected. This way,
you can prevent malfunction and/or damage to speakers or other devices.
• Before connecting the FR-1 to other devices, turn off the power to all
units. This will help prevent malfunctions and/or damage to speakers or
other devices.
Placement
• This device may interfere with radio and television reception. Do not use
this device in the vicinity of such receivers.
• Noise may be produced if wireless communications devices, such as cell
phones, are operated in the vicinity of the FR-1. Such noise could occur
when receiving or initiating a call, or while conversing. Should you expe-
rience such problems, you should relocate such wireless devices so they
are at a greater distance from this unit, or switch them off.
• Do not expose the FR-1 to direct sunlight, place it near devices that radi-
ate heat, leave it inside an enclosed vehicle, or otherwise subject it to
temperature extremes. Excessive heat can deform or discolor the unit.
•When moved from one location to another where the temperature and/
or humidity is very different, water droplets (condensation) may form
inside the FR-1. Damage or malfunction may result if you attempt to use
the FR-1 in this condition. Therefore, before using the FR-1, you must
allow it to stand for several hours, until the condensation has completely
evaporated.
• Do not allow objects to remain on top of the keyboard or buttons. This
can be the cause of malfunction, such as keys or buttons ceasing to pro-
duce sound.
• Depending on the material and temperature of the surface on which you
place the unit, its rubber feet may discolor or mar the surface. You can
place a piece of felt or cloth under the rubber feet to prevent this from
happening. If you do so, please make sure that the unit will not slip or
move accidentally.
Maintenance
• For everyday cleaning wipe the FR-1 with a soft, dry cloth or one that has
been slightly dampened with water. To remove stubborn dirt, use a cloth
impregnated with a mild, non-abrasive detergent. Afterwards, be sure to
wipe the unit thoroughly with a soft, dry cloth.
• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the
possibility of discoloration and/or deformation.
Additional precautions
•Please be aware that the memory contents can be irretrievably lost as a
result of a malfunction, or the improper operation of the unit. To protect
yourself against the risk of loosing important data, we recommend that
you periodically save a backup copy of important data you have stored in
the unit’s memory (see p. 26).
•Please be aware that all data contained in the unit’s memory may be lost
when the unit is sent for repairs. Important data should always be backed
up (see p. 26), or written down on paper (when possible). During repairs,
due care is taken to avoid the loss of data. However, in certain cases (such
as when circuitry related to memory itself is out of order), we regret that
it may not be possible to restore the data, and Roland assumes no liability
concerning such loss of data.
• Unfortunately, it may be impossible to restore the contents of data that
was stored in the FR-1 memory once it has been lost. Roland Corporation
assumes no liability concerning such loss of data.
• Use a reasonable amount of care when using the FR-1’s buttons, sliders,
or other controls; and when using its jacks and connectors. Rough han-
dling can lead to malfunctions.
•When connecting / disconnecting all cables, grasp the connector
itself—never pull on the cable. This way you will avoid causing shorts, or
damage to the cable’s internal elements.