User Manual

202
Using the Pads
You can create a list of sounds (settings) that you frequently use in
live performance, and recall them instantly. You can register patches,
rhythm sets, sample sets, live sets, or studio sets, and recall the
settings you need for your performance without regard to the mode
you might be in.
Sixteen settings can be registered in one list (one bank), and you can
create sixteen such banks.
For example you could use bank 1 for the sounds you use in the first
song of your live performance, and register up to sixteen sounds in
the order in which they are used in your song.
How Favorite differs from User Group (p. 201)
User Group let you register sounds within the mode (single,
live, or studio), while Favorite lets you register settings across
modes (single, live, or studio).
For details on the Favorite function, refer to “Creating a List of
Frequently Used Sounds (Favorite)” (p. 54).
1. Press [PAD MODE], and then press pad [16] (FAVORITE).
• You can press a pad [1]–[16]
to select the sound (setting)
that’s registered in that pad.
• By pressing [ROLL] (BANK)
you can switch banks (1–16).
→ p. 189
If you want to use the pads
to successively select live
sets (or studio sets), set the system setting on “Pad Assign
Source” (p. 288) to “SYS.” If this is set to “TEMP,” the pad
mode will switch to the setting of the newly selected live set (or
studio set) when you switch live sets (or studio sets).
1. Press [PAD SETTING].
The Favorite screen (p. 54)
will appear.
For details on operations in the Favorite screen, refer to
“Creating a List of Frequently Used Sounds (Favorite)” (p.
54).
16 FAVORITE
(Using the Pads to Register/Recall
Favorite Settings)
Recalling a Favorite Sound (Setting)
Registering a Favorite Sound (Setting)
Fantom-G_r_e.book 202 ページ ２００８年１月３１日 木曜日 午後１２時１５分