User Manual

22
Panel Descriptions
D BEAM
Here you can switch the D Beam function on/off. This lets you apply
various effects to the sound by moving your hand above the sensor.
→ (p. 72)
[PAD TRIGGER]
This lets you use the D Beam controller to play the pads, as an
alternative to striking them by hand. → (p. 73)
[SOLO SYNTH]
This lets you use the D Beam controller as a monophonic
synthesizer. → (p. 73)
* By holding down [SHIFT] and pressing the appropriate button,
you can access the D Beam setting screen.
[ASSIGNABLE]
This lets you assign various parameters or functions to the D Beam
controller, and use it to modify the sound in real time. → (p. 75)
[V-LINK]
This switches V-LINK on/off. The V-LINK setting screen will appear
when you turn this button on. → (p. 301)
INPUT
PEAK Indicator
This will light when the external input volume is too high.
[MIX IN]
This turns the external input on/off. → (p. 258)
* By holding down [SHIFT] and pressing this button you can
access the input setting screen. → (p. 258)
VOLUME
VOLUME Knob
This adjusts the overall volume that is output from the rear panel
OUTPUT A (MIX) jacks and PHONES jack. → (p. 28)
MODE
[STUDIO]
This puts the Fantom-G in Studio mode. Choose this setting for song
production. → (p. 66)
[LIVE]
This puts the Fantom-G in Live mode. Choose this setting when you
want to play multiple sounds layered together or split across the
keyboard. → (p. 58)
[SINGLE]
This puts the Fantom-G in Single mode. Choose this setting when
you want to play a single sound at a time. → (p. 46)
[FAVORITE]
This lets you register favorite sounds for immediate call-up — a
convenient capability for live performances. → (p. 54)
KEYBOARD
[ARPEGGIO]
This turns the arpeggiator on/off. → (p. 78)
[HOLD]
This switches the arpeggiator’s Hold function on/off. → (p. 78)
[CHORD MEMORY]
This switches Chord Memory on/off. → (p. 80)
* By holding down [SHIFT] and pressing these buttons, you can
access the setting screens for chord memory and the arpeggiator.
[-OCT], [+OCT]
These raise or lower the key range in one-octave steps. (-3– +3)
* By pressing the [-OCT] and [+OCT] buttons simultaneously you
can reset the setting to its original value.
[TRANSPOSE]
If this is on, you can use [-OCT] [+OCT] to raise or lower the key
range in semitone steps. (-5– +6)
* By pressing the [-OCT] and [+OCT] buttons simultaneously you
can reset the setting to its original value.
SEQUENCER
Here you can perform sequencer operations such as playback and recording.
[]
This moves the song position to the beginning of the song. If you
press this during playback, you will return to the beginning of the
song and stop. → (p. 206)
[] []
These move the song position to the first beat of the previous or next
measure. → (p. 206)
* By holding down [SHIFT] and pressing these buttons, you can
move the song position to the previous or next marker.
[LOOP]
This turns Loop Playback on/off. → (p. 208)
* By holding down [SHIFT] and pressing this button, you can
access the Loop setting screen.
[JUMP]
This jumps to the JUMP marker. If no marker has been set, it jumps
to the beginning of the song. → (p. 208)
* By holding down [SHIFT] and pressing this button, you can
access the Marker setting screen.
Front Panel
1 8 9 12 15
10
11
13 14
2
3
4
16
17
5
6
7
1
2
3
4
5
6
7
Fantom-G_r_e.book 22 ページ ２００８年１月３１日 木曜日 午後１２時１５分