User Manual

239
Editing Songs
Overview Sound 1 Sound 2 Sound 3 Pad Sampler
Menu/System
AppendixSequencer
Here’s how to play the currently-edited phrase.
1. Access the Phrase Edit screen (p. 238).
2. Press [PLAY] or [F7 (Play)].
Here’s how to erase the currently-edited phrase. This operation will
not delete the phrase file that’s saved in the project.
1. Access the Phrase Edit screen (p. 238).
2. Press [F1 (Clear)].
A confirmation message will appear.
3. Press [F7 (OK)] to execute.
If you decide to cancel, press [F8 (EXIT)].
This operation will save the phrase to the project.
A phrase you recorded or edited is temporary, and will be lost when
you turn off the power. If you want to keep the phrase, you must
save it.
1. Access the Phrase Edit screen (p. 238).
2. Press [F2 (Save)].
3. Assign a name to the phrase.
For details on assigning a name, refer to “Assigning a Name”
(p. 42).
4. When you’ve finished assigning a name, press [F8 (OK)].
A screen will appear where you can select the writing-
destination phrase.
5. Turn the VALUE dial or use [INC] [DEC] to select the phrase
number.
6. Press [F8 (Write)].
A message will ask you to confirm the Write operation.
Never turn off the power while writing is in progress.
7. Press [F7 (OK)] to execute.
If you decide to cancel, press [F8 (EXIT)].
1. Access the Phrase Edit screen (p. 238).
2. Press [F3 (Modify)].
The Phrase Modify Menu window will appear.
fig.19-008_50
3. Use / to choose the desired function, and then
press [F8 (Select)].
Quantize → p. 240
Erase → p. 242
Delete → p. 243
Copy → p. 243
Insert → p. 244
Transpose → p. 245
Change Velocity → p. 245
Change Channel → p. 246
Change Duration → p. 246
Shift Clock → p. 247
Data Thin → p. 248
Truncate → p. 249
For details on the edit window for each phrase modify function,
refer to the corresponding explanation.
4. Set the parameters of the edit function you chose. Use
[CURSOR] to move the cursor to the desired parameter, and
turn the VALUE dial or use [INC] [DEC] to make settings.
Verify that you’ve selected the object you intended to edit,
and make changes if necessary.
5. Press [F8 (Execute)] to execute.
When the operation is completed, the display will briefly
indicate “Completed !”.
If you decide to cancel, press [F7 (Cancel)].
Playing a Phrase (Play)
Erasing the Currently-edited Phrase
(Clear)
Saving a Phrase (Save)
Phrase Modify Menu
Fantom-G_r_e.book 239 ページ ２００８年１月３１日 木曜日 午後１２時１５分